Full Harvest of Green Trucks For Ford Commercial Customers
Ford Motor Co.'s (NYSE: F) ever-growing portfolio of fuel-efficient products extends to commercial customers, including those interested in alternative-fuel vehicles to "green" their fleets.
Visitors to the annual National Truck Equipment Association show in Indianapolis this week can see firsthand how Ford delivers the most comprehensive alternative-fuel choices for commercial customers.
The wide variety of vans and trucks with alternative-fuel capability is backed by support for customers looking to switch their vehicles from gasoline power to another fuel, such as compressed natural gas or propane. By 2012, half of all Ford vehicles will be capable of running on alternative fuel.
"No other manufacturer offers the range of vehicles and alternative-fuel solutions combined with comprehensive support," said Len Deluca, director, Ford Commercial Truck. "We're bringing our commercial customers the solutions they need in this ever-competitive environment."
As businesses seek to be more environmentally responsible in all facets of their operations, greening a vehicle fleet is often a natural first step that can have an immediate and positive impact. There also are government tax credit incentives for fleets to convert to alternative fuels.
With the wide variety of requirements for commercial vehicles – such as application, payload and driving cycle – Ford has developed an expansive suite of vehicles and alternative-fuel choices. Included are flex-fuel, natural gas and biodiesel vehicles, plug-in hybrids and battery electric vehicles.
"Our range of choices helps ensure customers can find the right product that best suits their needs," Deluca said.
For example, a battery electric vehicle might be appropriate for customers with multiple short trips over the course of a day totaling less than 100 miles. CNG, LPG and flex-fuel vehicles have a range of about 300 miles before needing to be refueled. Biodiesel and hybrid vehicles stretch the range even further, up to 500 miles.
Here's a quick look at the types of fuels offered in Ford commercial trucks:
* Flex fuel: A flexible-fuel vehicle (FFV) is an alternative-fuel vehicle with an internal combustion engine designed to run on more than one fuel, usually gasoline blended with ethanol (E85), and both fuels are stored in the same common tank. Flex-fuel engines are capable of burning any proportion of the resulting blend as fuel injection and spark timing are adjusted automatically according to the actual blend detected by electronic sensors. E85 is the most common flex fuel and many Ford engines are capable of using E85
Advantages – Ethanol/E85 is clean-burning and substantially reduces CO and CO2 emissions. Compared to gasoline, it is a higher octane, provides more horsepower and burns cooler. Corn and other cellulosic plants are readily available
Considerations – E85 produces less energy, so 1.56 gallons of E85 takes you as far as one gallon of gasoline. Due to the increased volume required and the fact that alcohol is corrosive, fuel system components must be upgraded
* Biodiesel: Biodiesel refers to a vegetable oil or animal fat-based diesel fuel. Blends of biodiesel and conventional hydrocarbon-based diesel are products most commonly distributed for use in the retail diesel fuel marketplace. A system known as the "B" factor is used to state the amount of biodiesel in any fuel mix – 20 percent biodiesel is referred to as B20, for example
Advantages – Biodiesel burns cleaner than petrodiesel, with reduced emissions
Considerations – Biodiesel may be more expensive than petrodiesel, and in low temperatures may require a special additive or fuel tank heater to flow properly
* CNG (compressed natural gas): CNG is a fossil fuel substitute for gasoline or diesel. It is safer than other fuels in the event of a spill (natural gas is lighter than air, and disperses quickly when released). CNG is made by compressing natural gas, which is mainly composed of methane. It is stored and distributed in hard containers at a pressure of 2,900 to 3,600 psi. CNG is used in traditional gasoline internal combustion engines that have been modified to operate on CNG
Advantages – CNG is an extremely clean-burning fuel and significantly reduces CO, CO2 and NOx compared to its gasoline counterpart. CNG has an octane rating of 130 and has the potential to optimize the engine's thermodynamic efficiency by utilizing a higher compression ratio
Considerations – CNG has slightly less energy than gasoline per unit volume and requires a larger fuel tank/container. Refueling time and infrastructure are also considerations
* LPG (liquefied petroleum gas): LPG is a flammable mixture of hydrocarbon gases, most commonly propane and butane. A powerful odorant is added so that leaks can be detected easily. As opposed to relying on foreign oil sources, approximately 90 percent of the United States' propane supply is produced domestically. Propane is nontoxic and cannot get into the water table if there is a leak in the storage container
Advantages – Power, acceleration, payload and cruise speed are comparable to those of an equivalent vehicle fueled with gasoline. Propane has a high octane rating of 104, in between CNG at 130 and unleaded gasoline at 87. Because it burns completely, there is less carbon buildup. Spark plugs, exhaust system and oil changes are needed less frequently
Considerations – Because of the low vapor pressure of propane, in extremely cold conditions starting could be an issue
* Hybrid: A plug-in hybrid electric vehicle (PHEV), also known as a plug-in hybrid, is a hybrid vehicle with rechargeable batteries that can be restored to full charge by connecting a plug to an external electric power source. A PHEV shares the characteristics of both a conventional hybrid electric vehicle, having an electric motor and an internal combustion engine, and an all-electric vehicle, also having a plug to connect to the electric grid
Advantages – Hybrids offer a greater range than electric-only vehicles and reduced tailpipe emissions. If a charging station is unavailable, the gasoline engine can provide power
Considerations – The vehicle essentially has two powertrains. With that comes increased vehicle weight, reduced payload and towing capability
* BEV (battery electric vehicle): A BEV uses chemical energy stored in rechargeable battery packs. As with other electric vehicles, BEVs use electric motors and motor controllers instead of an internal combustion engine for propulsion. The concept uses onboard batteries for propulsion and recharges the batteries using the electric grid
Advantages – Vehicles that run solely on electric power require no warm-up, run almost silently, and have excellent performance. Electric vehicles can be recharged at night when generating plants are underutilized. Electric vehicles produce zero tailpipe emissions. Even when emissions from the generating plants are factored in, electric vehicles emit less than 10 percent of the pollution of an internal combustion vehicle
Considerations – Pure electric vehicles still have limited range – typically no more than 100 to 120 miles. Depending on the charge voltage, most vehicles have to sit overnight for a full charge
Ford has developed and tested a CNG/LPG Gaseous Engine Prep Package to be installed by preferred upfitters, who install the CNG/LPG tanks and hardware. The engine comes with hardened exhaust valves and valve seats for improved wear resistance and durability for gaseous fuel systems, and Ford engineers work with the upfit companies to ensure consistent and reliable performance.
The new engine calibration maintains engine operating limits as specified for cylinder pressures, piston temperatures and engine speed, among others. Ford maintains the engine and powertrain warranty (five years/50,000 miles) and the upfitter is responsible for the system component warranty.
"Our expanded portfolio of commercial products that can operate on alternative fuels has been developed based on the relationships we have with our customers and a commitment to supporting their sustainability strategies," said Rob Stevens, chief engineer, Commercial Products. "Going forward, we will continue to maintain this customer-focused strategy in the development of future technologies."
More at www.ford.com
